How to paint Blood Angels – Part II

Welcome to the second part of this three-part tutorial on how I paint my Blood Angels. Check out Part I here where we cover the base red armour and airbrush steps, and Part III here which gives an overview of the finishing touches.

Now it’s on to detailing the model…

Step 6

How-to-paint-Blood-Angels-06

How-to-paint-Blood-Angels-07

Paint all the parts that will be black or steel with Vallejo Model Color ‘Black Grey’ (70862). We will be giving the black areas a black wash to shade them, so we want to start off lighter than pure black.

Next paint the steel parts with Vallejo Model Air ‘Gungrey’ (71072). This is an airbrush paint but works great with a normal brush too, giving good coverage and a smooth finish in one or two thin coats.

Paint the parts that will be gold using Forge World Castellax Bronze. This is also an airbrush paint but it works great for the same reasons given above and provides a nice base colour for gold (very similar to the old and much beloved ‘Tin Bitz’).

Paint the parchment with Vallejo Model Color ‘Burnt Umber’ (70941), the purity seals with Vallejo Game Color ‘Royal Purple’ (72016) and the eye lenses with Vallejo Model Color ‘Lime Green’ (70827).

Step 7

Now the model is given a gloss coat using Humbrol Gloss Clear through the airbrush. Once dry you can apply decals using Microset and Microsol (tutorial coming soon…).

How-to-paint-Blood-Angels-08

Step 8

Next I apply a wash made from 30ml Humbrol Gloss Clear to 2ml Daler Rowney FW black ink over the whole model to shade all parts and colours.

UPDATE: Since I came up with this process Games Workshop have released gloss versions of some of their shading washes. As I was running low on my custom ink mix I decided to give Citadel Nuln Oil Gloss a go and I have to say, I am very happy with the result! It’s at least as effective as the gloss / ink mix and arguably has a more even consistency. The end result is similar so use whichever you prefer, but as I’m lazy I’ll now be using the GW pre-mix myself.

How-to-paint-Blood-Angels-09

Step 9

Next the model is given a coat of Lahmian Medium through the airbrush to dull the gloss and give a semi-matte finish.

How-to-paint-Blood-Angels-10

If you are just looking for a table-top standard you can paint the base in your chosen colours and stop here, but in the next part we will be adding some final highlights and finishing touches…

Check out Part III here.

Categories: Blood Angels, Tutorials

20 replies »

  1. Hi, looks fantastic, going to use a lot of these tips for my Flesh Tearers. I particularly like the black wash towards the end, so effective. Do you need to do much cleanup with a cotton bud / Q-tip? Or with the steps outlined, all the black ends up in the crevices.

    Also, what’s your method for the gems (like the one on the left shoulder pad) Looks like the red basecoat, with a line highlight around the edge of the 1st highlight, then a hit of orange in the lower part, then the white lines in the opposite upper part.

    Cheers!

    • Hi and thanks!

      No cleanup on the wash. The key is the gloss coat before, and using gloss varnish mixed with ink for the wash itself. This flows very well into the recesses and, while it does stain / darken all the armour, it’s a much smoother and less ‘muddy’ finish than using the pre-mixed Citadel Shades. The Lahmian Medium coat really finishes it off perfectly.

    • Sorry I missed your question about the gems! So using this method after the basecoat and black ink wash the gems are already a dark, shaded red. I then use Vallejo Model Color Red, followed by Amarantha Red (which is orange), then as you say a small white reflection highlight in the opposite corner.

  2. Thanks for the replies! With the Humbrol + DR Ink wash – is that applied with a paintbrush or an airbrush? I initially thought it was applied with a paintbrush, but I think someone commented on your B+C blog about an airbrush… Cheers

    • Hi Greg, it is indeed applied with a bristle paint brush. Through an airbrush I think it would just stain the surface, and not run into the recesses. I have a plan to try the Nuln Oil Gloss from GW for this, as I think it might work similarly and would mean no need to mix my own.

  3. Hi Luther,

    Absolutely love these blood angels, fantastic work!

    I have a quick question if you don’t mind? at the end of Part I you mentioned not doing the Clear coat and DR wash if you did the Druchii violet and Dead white step? Would you still do the Clear coat and Lahmian medium step or just move on to doing the details/highlights and call it a day? I have had bad experience with varnishes (of all types) in the past and want to know if ill get the same results with missing this step.

    All the best,

    J

    • Hi J,

      Thanks for your comments – glad you like the Blood Angels! If you do the extra brush pre-highlighting / pre-shading you could move straight to details / edge highlights. The gloss coat serves two purposes: 1) seals and protects the airbrush layers, and 2) provides a gloss surface to help washes run into recesses and not stain surfaces so much. If you’re not planning to wash the armour then it’s really just for protection – if the airbrush layers are gloss coated and you make a mistake later you can actually remove the erroneous paint with alcohol without affecting the base coat.

      The black wash is quite important for achieving the finished look you see at the end of Part III, with really deep shading and contrast, but if you’re happy with the red armour at the end of Part I then you can just crack on!

  4. Hey Luther,
    It’s really a great tutorial. I’ve buyed the colors of your tut. But I have a little question, too. I’m not sure if I buy the right black ink.
    I’ve found two of them in the web:
    “Daler-Rowney FW Artists’ Ink black 6 oz” and “Daler-Rowney F.W. Acrylic Ink 1 oz Bottle – Black (India)”. Are both the same or is there any difference? I’ve buyed the “india” one. Is this the right one?
    Thx for your help!

    All the best

    Spinozist

  5. Hello amazing tutorial I am now up to the part with the washers. I do not have access to them washers is there any alternatives. I have all gw washes vallejo washs thank you

  6. Hello again I have a craft shop near me that’s sells all the stuff 🙂 more money to spend. The wife just loves it lol I don’t but transfer on my models as use the chapter shoulder pads. Do I need to buy humbrol clear and humbrol clear gloss to mix with inks?thank you

  7. Hi Thomas,

    You could try the new GW Nuln Oil gloss. I haven’t tried it yet but will be giving it a go myself. I mix my own using Humbrol Gloss Clear varnish and ink – the gloss varnish helps the wash run into the recesses and not stain the upper surfaces.

    Hope that helps!

  8. Hi Luther,
    So you suggest to use the nuln oil when the first layer of humbrol gloss is dry, instead of 30ml humbrol + 2ml black ink? Or It’s better Nuln oil + humbrol?
    About the DC, when you apply the liberal wash of Nuln oil, do you apply a dry layer of humbrol gloss before?
    Thank you

  9. Hi Dam,

    On red armour I would always apply a coat of gloss varnish and allow it to dry before applying a black wash. This is because the black is very high contrast to the red and you want it mainly to shade deep recesses and not stain the surface.

    Since I came up with my wash mix GW have released the Nuln Oil Gloss, which may work in the same way – but I haven’t tried it yet so can’t confirm.

    On black armour (Death Company) I don’t use a gloss varnish before the wash because the armour is already grey and will be very low contrast to the wash. Also I do want it to stain the surface and tone down the airbrushed grey highlights.

    I use Lahmian Medium as a matte varnish. I’m not sure how tough it is, but I’ve never had any problems with chipping etc after using it. Any model that has had a gloss varnish AND a coat of Lahmian Medium should be pretty well protected.

    Cheers,
    Luther

  10. Hi there. Great tutorial. Have you used molten bronze from P3? It’s my go to for darker golds and have yet to try castallax bronze from FW. I want to give it a go but wondered if you had any experience with both, which you preferred and why?

    Thanks

    • Hi Aaron,

      I haven’t tried P3 Molten Bronze but I’m sure it’ll work just fine. It’s just to provide a dark brown metallic base for the gold 🙂

      Cheers,
      Luther

  11. Do you know if Vallejo Premium airbrush color 62.064 Gloss Varnish would be equivalent to the Humbrol Gloss Clear? I already own the Vallejo version and could use the saved cash 😉 Great stuff.

    • Hi Eric,

      It should be fine – but best to test by brushing on to a small area. The clue is in the name – Clear. You want a clear gloss coat that does not affect the colour. I’ve found that some varnishes have a very slight blue tint to them but this is normally only satin or matte varnishes (I assume due to the matting agent).

      Cheers,
      Luther

Leave a Reply

Your email address will not be published.